Thursday, September 6, 2012

Fix A Weak Stream From The Bathroom Faucet

Weak streams are often due to sediment clogs.


A weak water stream from a bathroom faucet may create panic or, at the least, visions of expensive plumbing repairs. However, in most cases a stream of water that becomes weak is almost always due to sediment and minerals clogging up the faucet. Sediment is present in tiny amounts in the water supply, and over time it can build up to clog the faucet opening. Cleaning out the tip of the faucet opening typically restores the strength of the water flow.


Instructions


1. Put on disposable rubber gloves, which will help you get a better grip on the faucet aerator.


2. Examine the end of the bathroom faucet where the water comes out . There will be a small metal circle at the very tip, which is called the aerator. Grasp the circular section with your gloved hand and twist it counterclockwise to loosen it. Continue turning until it detaches completely from the faucet.


3. Turn the faucet on slowly and rinse the aerator under it to remove all dirt and sediment that is trapped in it.


4. Pour 1/2 cup of white vinegar into a small bowl and insert the aerator into it. Allow the aerator to soak in the vinegar for approximately five minutes. This dissolves any scale and mineral buildup that may be causing the weak stream.








5. Scrub the aerator gently with a soft-bristle toothbrush and rinse it under the faucet again to remove all traces of the vinegar.


6. Place the aerator under the tip of the faucet and screw it back on. Turn the faucet on. The flow of water will be much stronger than before cleaning.

Tags: aerator under, bathroom faucet, faucet opening, Turn faucet, under faucet