Many frugal people in the 1960s and '70s used commercial wire spools as dining room tables. This hippie icon stood the test of time, being both free and sturdy, but the style is distinctively low budget. For a more refined look in your dining room you can expand on the old, found creation and make a square dining room table that looks a bit more adult. At heart it's still a cultural standby, but on the surface it says you're ready to be more serious about your interior decor.
Instructions
1. Instruct the building supply company to cut your plywood sheet in half, leaving you two pieces of plywood that measure 4 by 4 feet and are 1/2 inch thick.
2. Measure across the top of the spool to get the spool width. Measure across the plywood square to find that width. Draw a cross on the plywood with one line going down the center of the board and one line going across the center. Subtract the spool width from the plywood width to find the overhang. Divide the overhang by 2. Measure down each of the lines from all to the distance you figured and make a mark. When you lay the spool on the plywood to center it, all four dots should be right at the edge of the spool. Center the spool on top of the square.
3. Turn the spool right side up, keeping the plywood exactly in place. Screw the plywood square onto the wooden spool circle. Space the screws halfway between the center of the square and the edge, and place them at 2, 4, 6, 8, 10 and 12 o'clock. Tighten the screws until the flat heads are sunk into the wood.
4. Spread a generous amount of wood glue onto the surface of the plywood square. Center the other square on top of the first with the rough side down. Match up all four edges exactly.
5. Place cinder blocks or other heavy objects on top of the plywood to hold it down while the glue is drying. Allow the glue to dry for 8 hours to achieve a secure hold. Cover the table with a square tablecloth to finish.
Tags: dining room, plywood square, four edges, line going, Measure across, spool width