An easy -to-build wall unit
Bedroom wall units provide display space for mementos and help keep clutter to a minimum. A cluttered bedroom is neither restful nor romantic. Remove anything that does not contribute to a restful, romantic atmosphere. Replace electronic items such as televisions and laptops with meditation music, scented oil burners, and items that remind you and your partner of your importance in one another's lives. You will spice up your love life and awaken refreshed and ready to tackle each day's challenges.
Instructions
1. Locate the wall studs with a stud finder. Measure from floor to the height you want the top shelf to be. Mark that point on one stud for each rail. Rails are the vertical boards of your wall unit.
2. Decide how wide you want your bedroom wall unit to be. Each rail will have to be centered on a stud so that the width of each shelf will be at least the distance between two studs. Use a level to mark the width of the wall unit to the desired height.
3. Sand and stain all boards, allow to dry for 24 hours. Stain all boards on the other side and allow 24 hours drying time again. Apply three to four coats of clear acrylic deck coating, drying between coats.
4. Drill two holes at each end of each shelf, 1 inch from the front and back edge of the wall unit. drill matching holes in each rail, at desired shelf height. Assemble your wall unit on the floor. Place shelves between every two rails. Stagger shelves in unit so the first and third row have three shelves each and the second and fourth rows have two or four. Square the shelves and rails so that each meets at a 90-degree angle.
5. Raise bedroom up to the wall. Drill pilot holes for all the wall brackets. Screw unit into wall using Sheetrock screws.
Tags: wall unit, your wall unit, allow hours, each rail, each shelf,