Thursday, May 24, 2012

Make A Board To Cover A Dining Table Top







Many people use their dining room tables only on formal occasions, and the tables tend to be more delicate and decorative than kitchen tables. Placemats and tablecloths will help protect the surface; however, for total protection many cover the dining table with a matching board.


Instructions








1. Measure the length and width of the dining room table. Write down the measurements.


2. Purchase a piece of wood that is the dimensions of the dining room tabletop. If there is not a precut piece of wood in the same size, buy a slightly larger piece of wood.


3. Size the board. Use a pencil and a level to create an outline on the board that is the same dimensions as the dining room tabletop. Use a circular saw and start cutting from the edge of the board. Cut on the outside (the right side) of the outline.


4. Sand the edges of the board. Stain or paint the board to match the dining room table. Allow to dry and apply a second coat if needed.

Tags: dining room, piece wood, dimensions dining, dimensions dining room, dining room table, dining room tabletop, room table