Removing a is a simple job.
Updating the look of your bathroom with a new Delta sink faucet is a simple chore for the do-it-yourself person. In some cases, the hardest part of the job is removing the old Delta faucet. In rare cases, corrosion and mineral deposits can grow between the faucet mounting hardware and sink. With the proper information, you can learn remove a Delta bathroom faucet with ease.
Instructions
1. Shut off the hot and cold water valves under the bathroom sink. Turn the Delta bathroom faucet on to alleviate the remaining water pressure.
2. Spread a bath towel on the bottom of the cabinet or floor under the shut-off valves to catch the remaining water in the supply lines. Unscrew the top water supply-line nuts from the faucet with a basin wrench.
3. Loosen the Delta bathroom faucet's mounting nuts under the sink with a . Finish removing them by hand.
4. Remove the faucet by rocking it back and forth to loosen the caulking or putty seal. Pull the faucet straight up and out of the sink.
5. Clean and dispose of any remaining sealant off the sink with a plastic putty knife and wet kitchen-scouring pad.
Tags: Delta bathroom faucet, basin wrench, bathroom faucet, bathroom faucet, Delta bathroom, faucet mounting