Bathroom space, while an important part of the overall design, doesn't need to take a large amount of space. Small bathrooms can create an efficient and effective use of space, allowing more room for the remaining area. A smaller bathroom can be more adaptable in regard to placement in the overall floorplan. With proper planning of space-saving fixtures and floorspace, you can put the bathroom anywhere in the house.
Instructions
1. Research the minimum size requirements for bathrooms in your area. In many states a minimum square footage is required. You must have clearances around each fixture in the bathroom as directed by local ordinances.
2. Measure the dimensions of the chosen space. Write down the height, width and length of the space. Draw out a floor plan on graph paper using the written measurements. Use a legend that shows a 1-inch measurement and the corresponding conversion measurement either above or below it (example: 1 inch on paper equals 5 inches of floorspace).
3. Choose the fixtures you are installing. Choose pedestal sinks, wall-mounted toilets and walk-in showers to conserve space. Obtain the dimensions of each fixture: height, width and length. Use the conversion guide on the to accurately draw in the fixture's position. Manufacturer's specifications can be found on the fixture at the supply store.
4. Locate the water and heating supply lines for the bathroom. If you are placing the bathroom adjacent to the kitchen, attempt to have the bathroom sink on the same wall as the kitchen sink. Consult a plumber if you are unsure of the pipes locations or they require repositioning or additions.
5. Plan the shelving around the fixtures. Utilize overhead space above the toilet and sink. Remember to allow for headroom.
Tags: each fixture, floor plan, height width, height width length, width length