Paint a Lacquered Dining Chair
Do you have some dining room chairs that could use a new coat of paint? If they have been previously coated with lacquer, you may need to take a couple of extra steps before you jump right in and start painting the chairs another color. Painting a slick or shiny surface, such as one coated with lacquer, can present somewhat of a challenge. Slick surfaces are more likely to chip and scratch. It is important to eliminate all of the shine before applying new paint. This can be accomplished fairly easily with just a few tools.
Instructions
1. Clean the chair thoroughly using mild soap and water. Mix a couple of drops of dishwashing liquid with 1 gallon of water. Dip a clean rag into the soap and rub the chair gently to remove dirt and grime. Wipe with a clean, damp rag. Dry thoroughly.
2. Apply a thick coat of paint stripper to the surface of the chair. Work the thinner into all of the crevices and corners of the chair. If the chair has a woven or fabric seat, cover it completely with tape and newspaper to protect it from the .
3. Allow the paint stripper to work on the finish of the chair for 20 to 30 minutes. Use a putty knife to test the finish to see if the stripper has begun to work. When the stripper has softened the lacquer enough that it begins to push away from the wood, it is time to remove the paint.
4. Remove the paint from the chair, using a putty knife and steel wool. Push the putty knife carefully along the arms and legs of the chair to remove paint. Use the steel wool to remove paint from the curved areas and any crevices. Use a damp rag to wipe the chemicals from the surface of the chair.
5. Sand the chair lightly to remove any large areas of remaining paint. Focus on creating a smooth surface rather than completely removing the paint. Work methodically from the top of the chair to the bottom to make sure the chair is evenly sanded. Wipe away the sanding dust with a slightly damp rag.
6. Paint the chair in a new finish, using a good-quality paintbrush. Use a small brush to work into the crevices and detailed areas. Follow with a medium-sized brush to apply paint to the arms and legs of the chair. Work from the top of the chair to the bottom, using enough paint to avoid brush marks but not so much paint that you end up with drips. Allow the first coat of paint to dry. Apply a second coat.
Tags: coat paint, from chair, paint stripper, putty knife, arms legs, arms legs chair
